ÌÇÐÄVlog¹Ù·½

The Teleblock K45 comes with one wide blind plate, two narrow blind plates, a metal divider plate, an insertion ring (push-pull or gas cylinder), a fixing thread and all the necessary screws. (The cover and the trim frame are supplied separately).

Also available with manual lifting system

Once connected and closed, it integrates perfectly into the furniture, concealing the connections and serving as a cable grommet.

Every Ofiblock Plus K45 is supplied with the aluminium bracket, frame holders, screws, a metal divider, two ground connections and two blind plates (for the front and side).

Installation of socket outlets with indicator light under the floor for easy location of the connection points. Ideal for low raised floors.

Every Ofiblock Compact K45 is supplied with an aluminium bracket, a blind side cover, a side cover for direct cable entry, screws and a blind front cover to facilitate internal cable routing.

Optional side covers for quick connection inlets.

Quick and easy installation by direct clipping to ÌÇÐÄVlog¹Ù·½ K45 solutions.

Rear cable inlets allow installation in any piece of furniture that is at least 10 mm wide.

The bracket fits into the frame from the back and stays securely in place thanks to the four locking tabs.

Frame with straight lines and minimalist aesthetic that integrates into any piece of furniture.

The SCM21F/9 and SCM31F/9 accessories allow access via 20x30 and20x50 mm mini trunking.

The ÌÇÐÄVlog¹Ù·½ K45 dual-surface box comes with a divider plate, fixing plugs and all the necessary screws.

The ÌÇÐÄVlog¹Ù·½ K45 dual-surface box comes with a divider plate, fixing plugs and all the necessary screws.

Specially designed for installing FTP and higher category connectors, where depth and radius are critical.

The necessary depth is achieved by installing a flush-mount junction box and a surface box.

The SCM21F/9 and SCM31F/9 accessories allow access via 20x30 and20x50 mm mini trunking.

Its IP66 degree of protection allows the solutions to be fully protected from shocks and external agents such as dust, liquids and humidity.

Its IP66 degree of protection allows the solutions to be fully protected from shocks and external agents such as dust, liquids and humidity.

False floor.

Coating.

Pour une installation dans les planchers techniques de jardins et terrasses, les estrades en bois, le parquet, etc.

Allows flush installation of the box in all types of floor coverings (stoneware, terrazzo, ceramic, etc.).

Safety closure.

Manual closing

Compatible with all the functions of the range: Electrical outlets, protection elements, VDM plates.

The protective cover with key restricts access to the connections and guarantees the exit of the cable to electrical equipment (vending machines, printers, etc.).

The individual brackets clip onto the profile using connection accessories, which allows blocks to be formed by separating the electrical part from the VDM part.

It is carried out using stainless steel hexagon socket screws which provide security (a specific key is necessary for dismantling) and aesthetics because the frame is perfectly flush with the surface.

The enclosures are 57 mm deep to respect the bending radius and facilitate the passage of cables during installation.

The enclosures are 57 mm deep to respect the bending radius and facilitate the passage of cables during installation.

Simplicity

• 1 side

Compact:

• 1 side for VDM

• 1 side for electrical sockets outlets (ref. K01/..)

For 4 workstations

Maximun capacity

•  4 sides

For 2 workstations

Design

•  2 sides

•  Oval shape

The ÌÇÐÄVlog¹Ù·½ K45 mini columns are installed directly on the floor using the attachment feet and are powered through cabling flush-mounted into the floor or under the raised flooring.

With a single item number, the ÌÇÐÄVlog¹Ù·½ K45 mini column is supplied with everything needed for its installation: the foot for attaching it to the floor, a top cover, side panels and other miscellaneous materials.

The ALKA02/8 adaptor allows the ÌÇÐÄVlog¹Ù·½ K45 mini-columns to be installed in the floor trunking baseboard and powered via 85x18 and 130x18 mm floor trunking.

The column is fixed to the ceiling by pressure, it is not necessary to screw it to the covering.

There are 4 types of profiles with different numbers of connection faces which allow a high concentration of solutions.

With a single reference, the K45 columns are supplied with all the elements necessary for its installation: foot for fixing to the floor, ceiling trim, telescopic assembly for fixing to the covering, aluminum covers and various small parts.

Push-button switch with indicator light that helps it to be located in the dark.

2-way switch with pilot light that indicates whether the switch is on or not.

Disconnect the two poles from a load or circuit while minimising any problems due to small leaks that may occur, in fluorescent bulbs, for example, when using a single-pole switch.

Allows the vertical positioning of switching mechanisms. Specially designed for installation in vertical enclosures (mini columns, columns, teleblocks, trunking, etc.).

The AC11 linking accessory allows the direct linking of quick connection socket outlets without having to wire them manually.

All socket outlets have a protective shutter to prevent direct contact with the live parts.

Protects the UPS line, allowing only computer equipment to be connected.

Red finish.

For connecting computer equipment via uninterruptible power supply.

Orange finish.

Specifically for powering servers or laboratory devices.

Green finish.

For the healthcare sector.

Plug holes set at 45º to prevent any interference that might be caused by using elbowed plugs in a group of electrical socket outlets.

Compatible with rigid and flexible 2.5 mm2 cable.

Compatible with rigid and flexible 2.5 mm2 cable.

Angled plates are perfect when using large connectors. They maintain the ideal bending radius, thus ensuring high-speed data transmission.

Space for writing or placing a label with the workstation number.

Space for writing or placing a label with the workstation number.

The RJ11 and RJ12 patch cords can also be combined with female RJ45 connectors.

Clipping sequence for MD modules in angled plates.

The flat plates are designed to fully integrate into the enclosures.

ÌÇÐÄVlog¹Ù·½â€™s philosophy is to integrate existing connectors in the market into our enclosures.

The K45 format protective elements can be installed in a wide variety of K45 enclosures. Thanks to their high 10-mA sensitivity, they are recommended for training centres, schools and nurseries.

The DIN K45 format protective elements are designed to be installed in Ofiblocks, mechanism holder channels, mini-columns and K45 columns.

1. Clip the DIN rail to the RCB or RCCB switch.
2. Clip the assembly to the enclosure or to the mechanism holder.
3. Install the trim plate.

Multimedia solutions designed to manage any type of connection.

Faster and easier internal connection system.